Pin It

Vinyl Cut Letters – Make Cutting And Shaping Easier

A vinyl cutter or plotter makes it much easier to cut letters out of vinyl, which means shaping and cutting may be easier. If you’re like most people, you don’t have a plotter at home. This machine isn’t hard to operate, but it must be calibrated and set up correctly. Likewise, adjustments will need to be made periodically depending on the size and thickness of your vinyl.

What It Is, In Detail

Primarily, a plotter is like a computer pen that uses modifications that include a cutting swivelling knife instead of a pen cartridge. You can install software on your computer that will format your design aspects into the data the plotter needs to cut. You can cut and remove the vinyl material and apply it to signs or other areas.

How To Use One

If you already have a plotter, you can use it to create and cut letters of various sizes. You’ll need to find the tension roller and flip it to the locked position, which will release some tension. The gauge clip should be pinched so you can adjust the guide to be slightly wider than the vinyl you’re cutting.

You can load the sheet of vinyl onto the platform and push it through to align with the front marking guide. Then, you’ll need to type in the depth of your cutting blade. However, it is always best to read the manual before doing any cutting.

What If You Don’t Have One?

While some companies have purchased one or plan to in the near future, you may not currently have a plotter but still want to have vinyl cut letters for signs and other needs. You can go to Gecko Sticker Signage and order pre-cut vinyl letters, which makes it easier for you to get the supplies you need for your signs and windows.

Leave a Reply

Your email address will not be published. Required fields are marked *